View DB107-C-S-R01_4625624.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DB107 -C-S-R01
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER
VOLTAGE 1000 Volts CURRENT 1.0 Ampere
FEATURES
* * * * * * * *
Good for automation insertion Surge overload rating - 50 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 1.0 gram
.255 (6.5) .245 (6.2) .350 (8.9) .300 (7.6)
DB-1
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O * UL listed under the recognized component directory, file #E94233.
.335 (8.51) .320 (8.12) .135 (3.4) .115 (2.9) .165 (4.2) .020 (0.5) .205 (5.2) .195 (5.0) .060 (1.5) .155 (3.9)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 40 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 1.0A DC Maximum Reverse Current at Rated DC Blocking Voltage per element @T A = 25 C @T A = 125 o C
o o
SYMBOL VRRM VRMS VDC IO I FSM R JA RJL TJ,TSTG
DB107-C-S-R01 1000 700 1000 1.0 50 40 15 -55 to + 150
UNITS Volts Volts Volts Amps Amps C/W
0
0
C
SYMBOL VF IR
DB107-C-S-R01 1.1 2.0 0.5
UNITS Volts Amps mAmps 2007-1
Note: 1."Fully ROHS compliant","100% Sn plating(Pb-free). 2. Thermal Resistance: PCB mounted.
RATING AND CHARACTERISTICS CURVES ( DB107-C-S-R01 )
INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A)
60 50 40 30 20 10 0
8.3mS Single Half Sine-Wave JEDEC Method
10
1
0.1
T J = 25 OC Pulse Width = 300S 1% Duty Cycle
0
2
4
6
10
20
40
60
100
0.01
0
0.5
1.0
1.5
2.0
2.5
NUMBER OF CYCLES AT 60Hz
INSTANTANEOUS FORWARD VOLTAGE, (V)
FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
INSTANTANEOUS REVERSE CURRENT, (A)
FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
1.5 AVERAGE FORWARD CURRENT, (A)
100
TA = 25 OC
1.0
10
1.0
0.5
60 Hz RESISTIVE OR INDUCTIVE LOAD
0.1 0
20
40
60
80
100
120
140
0 20
40
60
80
100
120
140 150
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
AMBIENT TEMPERATURE, (OC)
FIG.3 TYPICAL REVERSE CHARACTERISTICS
FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.

▲Up To Search▲

Price & Availability of DB107-C-S-R01

	To Download DB107-C-S-R01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .